The Lighting Controller

The delay I was talking about is the channel 1 fader of my Lustr+ fixtures while in the steps screen. I am just working with the laptop and the software...not connecting to controller or any actual fixtures. When trying to push the fader on channel 1(red) on universe 2 the fader does not respond right away. It will eventually move after a couple of seconds. I believe their is a conflict between the red and cyan colors. I changed the cyan color on channel 5 of the fixture to ucyan and this enables the channel 1fader(red) to move freely. I did notice that when moving the channel 1 fader that the ucyan fader also turns green? If I change the ucyan color to yellow this does not happen. I have also opened my light show in version 6.333 and the faders work normally. There seems to be a conflict between red and cyan/ucyan on the new version of the software. Let me know if you are able to duplicate this. Thanks

We are able to reproduce the problem.
We will check that and come back to you, as soon as possible.

Fixed for next release.

Perfect. Thank you for your help.

The fix is avaliable here: viewtopic.php?f=2&t=3677