Strobe always on [fixed]

declare your lighting equipment

Strobe always on [fixed]

Postby whitneml » 05 February 2019, 19:33

When editing a new fixture, I set the channel as Strobe speed per the manual and then set the levels as 000 - 015 as OPEN and then set the 016 - 255 as Strobe. When going into Steps, the fixture strobes slow even when the level is set to any index between 000 and 015. This is in Live View BTW. Question is am I missing something or is there no way to set 000 - 015 to show as Open in Live View?
whitneml
 
Posts: 9
Joined: 16 October 2018, 15:50

Re: Strobe always on

Postby SeekLighting » 05 February 2019, 20:25

Don't set the channel as "strobe", set it as "shutter". That will fix your problem
SeekLighting
 
Posts: 364
Joined: 03 April 2017, 02:28

Re: Strobe always on

Postby whitneml » 05 February 2019, 22:09

Thanks, that was what I was looking for!
whitneml
 
Posts: 9
Joined: 16 October 2018, 15:50


Return to Editor - Fixtures

Who is online

Users browsing this forum: No registered users and 7 guests