Eliminator - Frost FX Bar RGBW (111ch)

ask here the fixture profile you need for Pixels

Eliminator - Frost FX Bar RGBW (111ch)

Postby toddmoses34 » 05 January 2023, 04:37

Anyone have a profile for Eliminator Lighting Frost FX Bar RGBW? I've created a functional 18 channel profile but would like
the full 111 channel profile to gain full control because the 18 channel is limited to auto programs. Thanks in advance.
toddmoses34
 
Posts: 2
Joined: 05 January 2023, 04:07

Re: Eliminator Lighting Frost FX Bar RGBW 111 Channel

Postby support » 05 January 2023, 08:18

Please give us a link to download the manual of this fixture and we will do the profile for you (https://thelightingcontroller.com/viewt ... f=3&t=2453).
The Lighting Controller
support
Administrateur
 
Posts: 10538
Joined: 07 December 2009, 16:32

Re: Eliminator Lighting Frost FX Bar RGBW 111 Channel

Postby toddmoses34 » 08 January 2023, 17:12

Sorry. I should have included the traits. Thanks for your help.
https://d295jznhem2tn9.cloudfront.net/I ... TRAITS.pdf
toddmoses34
 
Posts: 2
Joined: 05 January 2023, 04:07

Re: Eliminator Lighting Frost FX Bar RGBW 111 Channel

Postby support » 11 January 2023, 12:19

Done, but please read carefully below:

This fixture is a bit complicated, as it's got basically two different Pixel fixtures within it. One set of 14 RGBW "main" pixels, and one set of 14 RGB "Background colour" pixels. Since Pixels can't handle this natively in one head file, we did a workaround by splitting up the head into two files, one for each set of pixels respectively. So you would just need to patch both files in, and offset the second file by 57 channels. It's not perfect, but it will work.
The Lighting Controller
support
Administrateur
 
Posts: 10538
Joined: 07 December 2009, 16:32


Return to Fixture profile requirement for Pixels

Who is online

Users browsing this forum: No registered users and 4 guests