How to control the channel "dimmer" ? [fixed]

create lighting scenes for RGB fixtures

How to control the channel "dimmer" ? [fixed]

Postby dax831 » 23 February 2013, 18:22

Hi

We are adding some Eurolite Pin Spots to our show and would like to use the Pixels feature with them.

The units have DMX channels Red, Green, Blue, Master Dimmer and Control. When using pixels the units don't illuminate as there doesn't seem to be an option in Pixels to control the dimmer channel.

The manual can be found at

http://media.steinigke.de/documents/00052425.pdf

Is there a workaround for this?

Regards

Paul
dax831
 
Posts: 3
Joined: 15 January 2013, 22:49

Re: Dimmer in Pixels

Postby support » 23 February 2013, 18:59

It is possible to force channel 4 (dimmer) to 255, in Pixels, like this:

In Fixture properties > section "Shared channels", you have to set the dropbox "Last channels" to "2" (means RGB are followed by 2 channels).
Then click on "Edit" to open the windows "Shared channels".
In the window "Shared channels", set the first fader (following RGB colors) (this is "dimmer") to 255.
Click on "close".

PS : you can also fix a value for channel 5.
The Lighting Controller
support
Administrateur
 
Posts: 10538
Joined: 07 December 2009, 16:32

Re: Dimmer in Pixels

Postby dax831 » 25 February 2013, 18:05

Many thanks.

Paul
dax831
 
Posts: 3
Joined: 15 January 2013, 22:49


Return to Pixels

Who is online

Users browsing this forum: No registered users and 1 guest

cron