Error message "There is no page to show" [fixed]

remote control for the section "Live" of the software

Error message "There is no page to show" [fixed]

Postby doudoupf » 01 September 2011, 15:57

Hi

i have a problem .
i have a iphone 4 and a box SweetlightBox (metal casing box with 4 plastic feet)

I want to control my box with my iphone .
i have set up the setting which i have found on the forum

My ip adress of my Pc is 192.168.0.20
i have set up this adress to control board .

And i do a DMZ on my routeur to my PC at my ip adress 192.168.0.20
I have desactived the firewall .

the error message is : there are no page to show

Thank to help me
best regards


Live_Mobile
- open the Settings of the iPhone
- select "Live_Mobile"
- Live IP address: enter the IP address of the computer where is our software
- Live port: keep the port value to 7348, which is the default value in the software
- Live password: enter a 4 digits password ("1234" for instance)
- connect your smartphone to the wifi network

Firewall (on computer)
Make sure your firewall is not blocking TCP communication via port 7348

Software (on computer)
- check the option Live > Preferences > Allow Live_Mobile (and restart Live)
- enter the same password in Live > Preferences > Live_Mobile password
- for each page you want to see in Live_Mobile, check the option Live > Page (right click) > Visible in Live_mobile
doudoupf
 

Re: Impossible to connect my iphone to my box

Postby support » 01 September 2011, 17:30

Are you sure you followed the last line of the tutorial ?
The Lighting Controller
support
Administrateur
 
Posts: 10538
Joined: 07 December 2009, 16:32

Re: Impossible to connect my iphone to my box

Postby rbekel » 13 February 2012, 03:45

I have the same problem iphone will not connect to ShowXpress. I have followed the instructions many many times and it will not connect. It will not connect even if I turn off the firewall. With firewall off it continually keeps trying to connect but does no. With the firewall turned on, it tries to connect and then shortly thereafter says it cannot connect and asks if I want to try again. H E L P!!!
rbekel
 
Posts: 69
Joined: 09 January 2010, 01:21

Re: Error message "There is no page to show" [fixed]

Postby support » 13 February 2012, 08:09

In this topic, the iphone connects perfectly to the computer.
The problem is there was no pages in Live with the option "Visible in Live_Mobile".
After checking this option to at least one page in Live, it worked.

You problem is totally different.
Please do not post in different problems topics.
The Lighting Controller
support
Administrateur
 
Posts: 10538
Joined: 07 December 2009, 16:32

Re: Error message "There is no page to show" [fixed]

Postby rbekel » 03 March 2012, 07:43

Where can I post the problem then?
rbekel
 
Posts: 69
Joined: 09 January 2010, 01:21

Re: Error message "There is no page to show" [fixed]

Postby support » 04 March 2012, 22:32

Create a new topic in this section: viewforum.php?f=48
The Lighting Controller
support
Administrateur
 
Posts: 10538
Joined: 07 December 2009, 16:32


Return to General

Who is online

Users browsing this forum: No registered users and 6 guests