The Lighting Controller
technical forum - dmx software & interfaces for Windows & Mac computers
Equinox - Fusion spot 150
4 posts
• Page 1 of 1
Equinox - Fusion spot 150
by mark » 16 November 2023, 16:41
can someone please make a profile for the equinox fusion spot 150 15 channels
- mark
- Posts: 15
- Joined: 09 June 2015, 16:58
Re: Profile
by support » 17 November 2023, 15:13
Please provide a link to download the manual of this DMX fixture and we will do the profile for you.
FYI: https://thelightingcontroller.com/viewt ... f=3&t=2453
FYI: https://thelightingcontroller.com/viewt ... f=3&t=2453
The Lighting Controller
- support
- Administrateur
- Posts: 10571
- Joined: 07 December 2009, 16:32
Re: Profile
by JBeeken27 » 17 November 2023, 19:57
- JBeeken27
- Posts: 6
- Joined: 16 November 2023, 19:24
Re: Profile
by support » 21 November 2023, 08:21
Done.
Note: the manual has some errors in the channel values for rotating gobo and prism. We have made it as close as possible but can't guarantee exact accuracy.
Note: the manual has some errors in the channel values for rotating gobo and prism. We have made it as close as possible but can't guarantee exact accuracy.
The Lighting Controller
- support
- Administrateur
- Posts: 10571
- Joined: 07 December 2009, 16:32
4 posts
• Page 1 of 1
Return to Fixture profile requirement for Editor
Who is online
Users browsing this forum: No registered users and 74 guests