Afx - LMH2332

ask here the fixture profile you need for Editor

Afx - LMH2332

Postby bakkerjo » 21 November 2022, 17:14

Hi there, just requesting this fixture to be added if possible.

I cant find a product page to download the manual but I've made 2 photo's: from the manual and the DMX addresses from the manual

NOTE:
the y position has an angle of 0-315 degrees where 0 degrees the led is upright, and so 315 degrees is not. I can't get this into the software. Hopefully you do

Thnx for your help
bakkerjo
 
Posts: 1
Joined: 20 November 2022, 10:49

Re: AFX light - LMH2332

Postby support » 24 November 2022, 10:24

Done.
But not possible to show both beams in 3DView (https://thelightingcontroller.com/viewt ... f=13&t=668).
The Lighting Controller
support
Administrateur
 
Posts: 10538
Joined: 07 December 2009, 16:32


Return to Fixture profile requirement for Editor

Who is online

Users browsing this forum: No registered users and 12 guests