Cameo - NanoSpot 300

ask here the fixture profile you need for Editor
Post Reply
Jerrel
Posts: 4
Joined: 13 September 2022, 11:29

Cameo - NanoSpot 300

Post by Jerrel »

Hello,

Could you please make a profile for this fixture.

Link to the DMX Control Table: https://www.cameolight.com/en/downloads ... /381858994

I would like to use 11 channels please.

Many thanks!
Top
support
Administrateur
Posts: 10671
Joined: 07 December 2009, 16:32

Re: Cameo - NanoSpot 300

Post by support »

Done.

PS: there is no gobo images in the manual, so 3DView will show big numbers instead.
The Lighting Controller
Top
Post Reply

Return to “Fixture profile requirement for Editor”