Evolite - Moving Beam 2R MKII

ask here the fixture profile you need for Editor

Evolite - Moving Beam 2R MKII

Postby rmsonorisation » 22 October 2020, 13:41

introuvable dans la librairie
rmsonorisation
 
Posts: 9
Joined: 02 October 2020, 16:35

Re: Moving Beam 2R MKII de Evolite

Postby support » 22 October 2020, 15:45

Veuillez SVP nous donner un lien où télécharger le manuel de l'appareil, et on fera la libraire au plus vite.
https://thelightingcontroller.com/viewt ... f=3&t=2453
The Lighting Controller
support
Administrateur
 
Posts: 10538
Joined: 07 December 2009, 16:32

Re: Moving Beam 2R MKII de Evolite

Postby rmsonorisation » 22 October 2020, 16:55

Voici le lien correspond à mes machines:

http://static.evolite-pro.com/pdf/manua ... manual.pdf
rmsonorisation
 
Posts: 9
Joined: 02 October 2020, 16:35

Re: Moving Beam 2R MKII de Evolite

Postby support » 24 October 2020, 18:10

C'est fait, mais il se peut que la librairie soit imparfaite, car les incohérences suivantes dans les manuels ont été reportées par la personne en charge de faire les librairies :
- Both manuals list a 15ch and 19ch mode, but only the information for the 19ch profile are provided
- Pan and tilt ranges are not listed for either fixture
- Both fixtures are supposed to only have 1 colour wheel according to the description, but in the channel information, there are two colour wheel channels for each, and the information provided within them ranges from vague to incomplete.
- No gobo images are provided so the gobos will just be the default numbers included in the software
The Lighting Controller
support
Administrateur
 
Posts: 10538
Joined: 07 December 2009, 16:32

Re: Evolite - Moving Beam 2R MKII

Postby rmsonorisation » 26 October 2020, 09:19

Bonjour,

je ne trouve pas mes machines dans votre librairie d'appareils, même en aillant fait une mise a jour du logiciel, pouvez-vous me donner le lien afin de pouvoir mettre à jour mes appareils et pouvoir programmer en 3D.Merci
rmsonorisation
 
Posts: 9
Joined: 02 October 2020, 16:35

Re: Evolite - Moving Beam 2R MKII

Postby support » 26 October 2020, 10:12

Il faut télécharger le fichier depuis notre serveur, et l'importer dans votre logiciel.
La procédure est expliquée ici : https://thelightingcontroller.com/viewt ... f=3&t=2453 (dans la section "Editor")
The Lighting Controller
support
Administrateur
 
Posts: 10538
Joined: 07 December 2009, 16:32


Return to Fixture profile requirement for Editor

Who is online

Users browsing this forum: No registered users and 12 guests