60W LED Mini Beam Stage Light

ask here the fixture profile you need for Editor

60W LED Mini Beam Stage Light

Postby Sockiemeister » 08 September 2020, 00:05

Hi all,

We recently purchased some cheap LED movers on ebay for a very low budget youth production.

I have tried creating a new fixture with the following details but even after doing so, I cannot get the light to respond to ANY dmx input in 13ch mode. Have not yet tried 11ch mode.
The lights work fine in test function but as soon as DMX is send the light is unresponsive.

ebay link: https://www.ebay.com.au/itm/232619297689

Alleged channel programming

1 - pan
2 - pan fine
3 - tilt
4 - tilt fine
5 - XY motor speed
6 - Dimmer
7 - Strobe
8 - Red dimmer
9 - Green dimmer
10 - Blue dimmer
11 - White dimmer
12 - auto run
13 - reset


11ch mode is supposedly

1 - pan
2 - pan fine
3 - tilt
4 - tilt fine
5 - XY motor speed
6 - Dimmer
7 - Strobe
8 - Red dimmer
9 - Green dimmer
10 - Blue dimmer
11 - White dimmer


Has anyone got a similar fixtire they can share a profile for or am I on struggle street here?

Hardware: Chauvet xpress512 plus
Software: showxpress latest release on macos


Hope someone can help!

Thanks!
Sockiemeister
 
Posts: 3
Joined: 07 September 2020, 23:52

Re: Help Please *ebay light programming

Postby Sockiemeister » 08 September 2020, 10:59

I found an identical looking fixture on amazon which had this available.

https://images-na.ssl-images-amazon.com ... 3al-5L.pdf

I tried programming as 11ch but no go still. Lights work fine on auto or sound activated
Sockiemeister
 
Posts: 3
Joined: 07 September 2020, 23:52

Re: Help Please *ebay light programming

Postby support » 09 September 2020, 06:51

Done.
The Lighting Controller
support
Administrateur
 
Posts: 8973
Joined: 07 December 2009, 16:32


Return to Fixture profile requirement for Editor

Who is online

Users browsing this forum: No registered users and 6 guests