Page 1 of 1

Ave - Quadpro-flat parcan

PostPosted: 03 January 2019, 15:34
by GEN
Hello,

For my "Quadro-flat parcans" could you please create a fixture for use of "steps" and "Generator" in Chauvet showxpress
Thank you
Required details are as follows:
https://cdn.djcity.com.au/wp-content/up ... manual.pdf

Re: Quadpro-flat parcans

PostPosted: 06 January 2019, 15:26
by GEN
I asked the following question, and have yet to hear a reply...I hope someone can help me soon

( "Quadro-flat parcans" could you please create a fixture for use of "steps" and "Generator" in Chauvet showxpress)
The details are below:
https://cdn.djcity.com.au/wp-content/up ... manual.pdf

Re: Quadpro-flat parcans

PostPosted: 07 January 2019, 10:04
by support
Done.

Re: Ave - Quadpro-flat parcan

PostPosted: 07 January 2019, 11:19
by GEN
Thanks, just visiting Show Xpress, and looking for AVE Quadpro-flat in fixtures but I cant find it. Maybe it needs time before being listed in fixtures?
or...Has it been listed under AVE or Quadpro-flat., or under some other fixture name?
(note another fixture from same company....AVE...the Cobra Wash 200...listed but under ..."Avr", instead of "AVE"...Is is possible to change the listed fixture name?)

Thankyou

Re: Ave - Quadpro-flat parcan

PostPosted: 07 January 2019, 14:51
by support
The name is fixed in our master software files. This will be ok for the next complete software setup.
In the meantime, you will find the file here: http://download.thelightingcontroller.c ... on_8.2.18/

Re: Ave - Quadpro-flat parcan

PostPosted: 09 January 2019, 13:33
by GEN
Re- your message below, I don't see the AVE Quadpro-flat parcan file in the link given.
If the name is fixed in your master software files, when will the next complete software setup be.
I really need to get everything setup for some upcoming gigs.
Thank you

Re: Ave - Quadpro-flat parcan

Postby support ยป 08 January 2019, 00:51
The name is fixed in our master software files. This will be ok for the next complete software setup.
In the meantime, you will find the file here: http://download.thelightingcontroller.c ... on_8.2.18/

Re: Ave - Quadpro-flat parcan

PostPosted: 09 January 2019, 16:52
by support

Re: Ave - Quadpro-flat parcan

PostPosted: 10 January 2019, 15:23
by GEN
Great, thanks!!