Ave - Quadpro-flat parcan

ask here the fixture profile you need for Editor

Ave - Quadpro-flat parcan

Postby GEN » 03 January 2019, 15:34

Hello,

For my "Quadro-flat parcans" could you please create a fixture for use of "steps" and "Generator" in Chauvet showxpress
Thank you
Required details are as follows:
https://cdn.djcity.com.au/wp-content/up ... manual.pdf
GEN
 
Posts: 7
Joined: 02 January 2019, 14:55

Re: Quadpro-flat parcans

Postby GEN » 06 January 2019, 15:26

I asked the following question, and have yet to hear a reply...I hope someone can help me soon

( "Quadro-flat parcans" could you please create a fixture for use of "steps" and "Generator" in Chauvet showxpress)
The details are below:
https://cdn.djcity.com.au/wp-content/up ... manual.pdf
GEN
 
Posts: 7
Joined: 02 January 2019, 14:55

Re: Quadpro-flat parcans

Postby support » 07 January 2019, 10:04

Done.
The Lighting Controller
support
Administrateur
 
Posts: 7779
Joined: 07 December 2009, 16:32

Re: Ave - Quadpro-flat parcan

Postby GEN » 07 January 2019, 11:19

Thanks, just visiting Show Xpress, and looking for AVE Quadpro-flat in fixtures but I cant find it. Maybe it needs time before being listed in fixtures?
or...Has it been listed under AVE or Quadpro-flat., or under some other fixture name?
(note another fixture from same company....AVE...the Cobra Wash 200...listed but under ..."Avr", instead of "AVE"...Is is possible to change the listed fixture name?)

Thankyou
GEN
 
Posts: 7
Joined: 02 January 2019, 14:55

Re: Ave - Quadpro-flat parcan

Postby support » 07 January 2019, 14:51

The name is fixed in our master software files. This will be ok for the next complete software setup.
In the meantime, you will find the file here: http://download.thelightingcontroller.c ... on_8.2.18/
The Lighting Controller
support
Administrateur
 
Posts: 7779
Joined: 07 December 2009, 16:32

Re: Ave - Quadpro-flat parcan

Postby GEN » 09 January 2019, 13:33

Re- your message below, I don't see the AVE Quadpro-flat parcan file in the link given.
If the name is fixed in your master software files, when will the next complete software setup be.
I really need to get everything setup for some upcoming gigs.
Thank you

Re: Ave - Quadpro-flat parcan

Postby support » 08 January 2019, 00:51
The name is fixed in our master software files. This will be ok for the next complete software setup.
In the meantime, you will find the file here: http://download.thelightingcontroller.c ... on_8.2.18/
GEN
 
Posts: 7
Joined: 02 January 2019, 14:55

Re: Ave - Quadpro-flat parcan

Postby support » 09 January 2019, 16:52

The Lighting Controller
support
Administrateur
 
Posts: 7779
Joined: 07 December 2009, 16:32

Re: Ave - Quadpro-flat parcan

Postby GEN » 10 January 2019, 15:23

Great, thanks!!
GEN
 
Posts: 7
Joined: 02 January 2019, 14:55


Return to Fixture profile requirement for Editor

Who is online

Users browsing this forum: No registered users and 2 guests