Hello
I connect the DMX output of the Showtec 512 to the DMX in of the Sweetlight for triggering DMX.
I have a LED Par 64, 7ch. DMX
When i patch DMX input 1, to ch.7 (led par 64 dimmer), I can control the dimmer of the Par64 with channel 1 from the Showtec 512 mixer.
But....
The Led par will flash sometimes, like a strobe, but once in 20/30 secs. I see it also in de 3D view.
Why does this happen?? When i put the showtec dimmer to 256, the Led par 64 will go on, but flashes without any logical reason. Sometimes every 10 sec, and sometimes around 20 sec.
When i connect multiple Par 64, on multiple DMX channels, it onlyh happens to par 1. When i disconnect par 1, it happens to par 2. But not on led par 3 or 4.
It looks like the trigger from the Showtec 512 doesnt work correctly. When i remove the dmx input patch, and control the dimmer with the sofware fader (Editor) there is no problem.
Looked futher, and there are no overlapping DMX channels, or other DMX stuff running.
Please help me!! I got a big show tomorrow, and I really need to control the LEd par dimmers with the Showtec 512!!