2nd hand SSA on Windows 11

[Keis]

Hi there,

just bought a second hand SSA, the power lights up, connection led stays out but when I connect the USB cable on my Windows 11 laptop there is the tada music. In the Windows Device Manager there is an unknown device under the Other Devices Section. I already installed the newest 64-bit software, downloaded the drivers separately but nothing fixes the issue... The person I bought the SSA from connected it to his Mac and it was recognized there.
I searched the forum but couldn't find the answer

Any tips or maybe the link to the correct driver?

Tnx and kind regards,
Keis

Edit: Or should I take a Windows 7 pc or a Mac?

[support]

Please email us (https://forum.thelightingcontroller.com ... p?f=3&t=19) a picture of the serial number (on rear panel) and also a picture of the front panel.
We will check if there could be a problem or not.

[Keis]

Please email us (https://forum.thelightingcontroller.com ... p?f=3&t=19) a picture of the serial number (on rear panel) and also a picture of the front panel.
We will check if there could be a problem or not.

Pics are in the mail. Tnx!!

[support]

Please send a picture of the complete rear panel of the interface. There should be another sticker with 7 or 8 numbers.

[Keis]

Please send a picture of the complete rear panel of the interface. There should be another sticker with 7 or 8 numbers.

there is no other sticker ... I've send the picture on the mail

Tnx!

[support]

Noted.

It should work anyway.
You will find the drivers here: https://forum.thelightingcontroller.com ... =85&t=4555
And please follow this for the manual installation for the driver: https://www.youtube.com/watch?v=trr0uqop1TQ