30 channel dmx led strip controller

usb to dmx (2009 - 2019)

Re: 30 channel dmx led strip controller

Postby chadpressley » 07 August 2016, 14:08

So what is the signal packet speed for the 512 and 512plus? Is it 2ms?
chadpressley
 
Posts: 11
Joined: 20 July 2016, 03:12

Re: 30 channel dmx led strip controller

Postby chadpressley » 27 August 2016, 03:26

This decoder does work with the dmx512plus. https://www.amazon.com/gp/aw/d/B00Q1N1N ... ref=plSrch
chadpressley
 
Posts: 11
Joined: 20 July 2016, 03:12

Re: 30 channel dmx led strip controller

Postby vincentcolignon » 24 February 2017, 16:19

Any news on this subject ?

I just bought 4 x 30ch dmx controllers for led strips and they don't work on my 512.
Is there a way to make them work ?

Anyone ?

Thank you,
vincentcolignon
 
Posts: 4
Joined: 24 October 2015, 16:12

Re: 30 channel dmx led strip controller

Postby support » 24 February 2017, 18:27

The dmx signal of this interface is not user customisable.
It has the same timing for the past 8 years.
The Lighting Controller
support
Administrateur
 
Posts: 8455
Joined: 07 December 2009, 16:32

Re: 30 channel dmx led strip controller

Postby supermercer » 12 July 2019, 22:13

I just purchased some - 30 channel decoders from aliexpress I use the showXpress and the Xpress 512 dongle for the rest of my lighting. The dmx is not read by the decoder. If I plug the decoder into a basic light board it works fine. I've been searching the forums for answers. Some suggest it could work with an x-factor but not the 512. Also I'm wondering if a firmware upgrade would fix it.
supermercer
 
Posts: 3
Joined: 12 July 2019, 22:01

Re: 30 channel dmx led strip controller

Postby support » 13 July 2019, 14:38

Sorry but the dmx signal of this interface is not user customisable.

FYI: the new dmx interfaces D512S and D1024 have a different firmware (and a different dmx signal).
The Lighting Controller
support
Administrateur
 
Posts: 8455
Joined: 07 December 2009, 16:32

Previous

Return to D512

Who is online

Users browsing this forum: No registered users and 5 guests