The fixture doesnt detect signal

usb to dmx - 100 dmx channels only for Windows (2011 - 2019)

The fixture doesnt detect signal

Postby davidtoro » 03 February 2011, 22:41

i try to connect some fixtures with the showxpress 100 but the light doesnt show signal what can i do??
davidtoro
 
Posts: 4
Joined: 03 February 2011, 22:38

Re: The fixture doesnt detect signal

Postby tomrbland » 03 February 2011, 23:47

You could give us more info.....

What have you tried doing? Are you using the latest drivers and software? What operating system etc etc Have you turned on the DMX "traffic light" in the program that you are using?

There are to many options. We need more info as to what you have tried, and what your setup is if we are to help you.
tomrbland
 
Posts: 411
Joined: 24 December 2009, 12:21
Location: UK - next to Alton Towers

Re: The fixture doesnt detect signal

Postby davidtoro » 04 February 2011, 00:03

I am trying whit windows 7 32 bits, the green light works good, when i open v6 it detect universe 1 100 , when i open v5 it also works, so i have tried to connect in ledsplah, atomic, and q spot 575 but the lights doesnt show signal, do you need more information please tell my and i will reply this message inmediatly
davidtoro
 
Posts: 4
Joined: 03 February 2011, 22:38

Re: The fixture doesnt detect signal

Postby support » 04 February 2011, 08:09

Please follow this: viewtopic.php?f=15&t=613
And let us know at which line it does not work.
The Lighting Controller
support
Administrateur
 
Posts: 10538
Joined: 07 December 2009, 16:32

Re: The fixture doesnt detect signal

Postby tomrbland » 04 February 2011, 11:25

davidtoro wrote:when i open v6


Are you on the latest version of V6?
tomrbland
 
Posts: 411
Joined: 24 December 2009, 12:21
Location: UK - next to Alton Towers

Re: The fixture doesnt detect signal

Postby davidtoro » 09 February 2011, 00:13

no im using the v6.26 but the light doesnt detect the controller
davidtoro
 
Posts: 4
Joined: 03 February 2011, 22:38

Re: The fixture doesnt detect signal

Postby support » 09 February 2011, 07:54

We suppose you want to say: "the software does not detect the interface". In other words, ControlBoard does not show the message "interface xxx found". In that case, it looks like a driver problem. Please make a manual driver re-install, following the manual from pages 15 to 16.
The Lighting Controller
support
Administrateur
 
Posts: 10538
Joined: 07 December 2009, 16:32


Return to Cable

Who is online

Users browsing this forum: No registered users and 5 guests