computer, driver, ...


Postby laurensbol » 15 June 2021, 07:27

Is someone having an idea for me.
I have to program lights for a swimming pool. Everything in and out the pools are controlled by KNX-protocol.
We are using a Rack1024 to make connection to dmx, and this works fine with 8 buttons
But we need to switch to more scenes as 8.

On the board I find out to solder a extra connector on the board. than I have 16. But than i have no warranty anymore I think.

Is anyone having a nice idea for me?

for a nice look of the project:
Posts: 6
Joined: 10 June 2021, 06:43

Re: KNX => DMX

Postby support » 15 June 2021, 21:29

If this extra connector is soldered properly, no problem for the warranty.

Thank you for the video !
The Lighting Controller
Posts: 9258
Joined: 07 December 2009, 16:32

Return to General hardware

Who is online

Users browsing this forum: No registered users and 2 guests