DMX input not working DMXKing ultraDMXmicro

computer, driver, ...

DMX input not working DMXKing ultraDMXmicro

Postby EvanHopps » 06 August 2016, 04:44

I am trying to use a small 12 channel DMX console as a DMX input to be able to use the faders to control some Source 4s through the software, rather than using a separate DMX line to the stage just for those lights.

I have a Xpress512Plus for the DMX output and a DMX King ultraDMX Micro (http://dmxking.com/usbdmx/ultradmxmicro) that hopefully will be used as the input. I have the DMX King set as an input device using their config software and I can see it receiving inputs on the correct channels on their software, I just cant seem to get showXpress to use it, or really see it at all.

I understand that this device may not be compatible with showXpress, and if that is the case, what device should I look into to enable DMX input?

Thanks
EvanHopps
 
Posts: 5
Joined: 30 July 2016, 06:39

Re: DMX input not working DMXKing ultraDMXmicro

Postby support » 06 August 2016, 15:12

To have dmx in and dmx out with our software, you have to use the interface "Rack".
viewtopic.php?f=3&t=5
The Lighting Controller
support
Administrateur
 
Posts: 10538
Joined: 07 December 2009, 16:32


Return to General hardware

Who is online

Users browsing this forum: No registered users and 11 guests