I Read this post about basically what I'd like to request: http://forum.thelightingcontroller.com/viewtopic.php?f=15&t=1218&p=4932&hilit=assign+universes#p4932
The problem is After I restart, sometimes the universes changes even if the USB cables haven't been changed. I'd like to manually assign them via the ShowXpress software.
I'd also like to request the use of 8 DMX Universes, not 6. I'm maxing out at 6 with all the LEDs and Pixels we're using. Either ARTNET or 8 DMX Universes would be perfect! Thanks!
-Josh
Manually Assign USB Interfaces to Specific Universes
-
- Posts: 95
- Joined: 24 December 2009, 23:01
- Location: San Diego, CA
- Contact:
Manually Assign USB Interfaces to Specific Universes
Working on the next BIG thing
Re: Manually Assign USB Interfaces to Specific Universes
sometimes the universes changes even if the USB cables haven't been changed
Noted for quantity of universes.
The Lighting Controller