More than 4 zones required, for stand-alone using

computer, driver, ...

More than 4 zones required, for stand-alone using

Postby MrData » 14 March 2013, 19:45

Hallo,
Ist es möglich, das ihr in der nächsten Version mehr als vier Zonen einbauen könnt?
Wir haben öfters das Problem, das wir mit den vier Zonen nicht auskommen (nebelmaschine,stroboskop,led pars, movingheads heads USW usw)

Wünschenswert wäre es wenn man mindestens 8-16 Zonen hätte.

Wir haben bisher 18 Boxen verbaut und überall haben wir das Problem mit den Zonen.

Vielen dank

Torsten
MrData
 
Posts: 14
Joined: 14 March 2013, 19:40

Re: Overlaying

Postby support » 15 March 2013, 11:31

Sorry but we can answer only in English language (please use Google translate).

We note your requirement "more than 4 zones in stand-alone using".
This is the first requirement for that. Since this improvement would be very "delicate" (means new firmware version), we need to wait about other users mind about that.
The Lighting Controller
support
Administrateur
 
Posts: 10538
Joined: 07 December 2009, 16:32

Re: Overlaying

Postby MrData » 15 March 2013, 14:46

Hello,
Is it possible that in the next version you can install more than four zones?
We often the problem that we do not get along with the four zones (smoke machine, strobe, led pars, moving heads heads ETC etc)

It would be desirable if they had at least 8-16 zones.

We have so far built 18 boxes and everywhere we have the problem with the zones.

Thank you very much
MrData
 
Posts: 14
Joined: 14 March 2013, 19:40

Re: Overlaying

Postby support » 15 March 2013, 15:10

We note your requirement "more than 4 zones in stand-alone using".
This is the first requirement for that. Since this improvement would be very "delicate" (means new firmware version), we need to wait about other users mind about that.
The Lighting Controller
support
Administrateur
 
Posts: 10538
Joined: 07 December 2009, 16:32

Re: More than 4 zones required, for stand-alone using

Postby Lighter007 » 09 December 2013, 13:41

Meinst du vielleicht so was mit "Zonen": :)
Live -> Menü: Tasten -> Tasten #1 -> 8 Tastaturen
Image
Greetings from Germany! :)
Lighter007
 
Posts: 238
Joined: 19 February 2013, 14:50
Location: Minden-GER

Re: More than 4 zones required, for stand-alone using

Postby MrData » 09 December 2013, 14:23

Nein, ich meine in der Stand Alone Version kann man nicht mehr als 4 Zonen auswählen, die dann über die Fernbedienung abgerufen werden können.
MrData
 
Posts: 14
Joined: 14 March 2013, 19:40


Return to General hardware

Who is online

Users browsing this forum: No registered users and 9 guests