Hi,
How can I make visible split color in 3d view?
Split color not visible in 3d view
Re: Split color not visible in 3d view
This could be possible by replacing the channel "color" by the channel "gobo", with "dual color" textures as gobo.
FYI: https://forum.thelightingcontroller.com/viewt ... f=13&t=498
FYI: https://forum.thelightingcontroller.com/viewt ... f=13&t=498
The Lighting Controller
Re: Split color not visible in 3d view
Wondering if a split colour has been achieved?
The fixture file has a 'colour' line as well as a 'gobo' line
Could I drop maybe a solid colour graphic as a PNG file to emulate a colour in the 'colour' line instead of the wording 'blue' 'white' etc.
Then create a split colour PNG file?
Not sure this will work as looks like the 'colour' section is looking for word reference and not graphical elements.
The fixture file has a 'colour' line as well as a 'gobo' line
Could I drop maybe a solid colour graphic as a PNG file to emulate a colour in the 'colour' line instead of the wording 'blue' 'white' etc.
Then create a split colour PNG file?
Not sure this will work as looks like the 'colour' section is looking for word reference and not graphical elements.
Re: Split color not visible in 3d view
No change since our previous post of 19th of November 2023.
The Lighting Controller