by thorehl » 26 December 2021, 13:40
Easy work-around (Windows)
Tip 1:
In Editor > Fixtures, Right-click your fixture and select "Clone fixture" and enter 3.
Now in 3DView, you will have 1+3 fixtures illuminating from the same DMX channels.
Tip 2:
If your fixture has
Ch1 Dimmer
Ch2 Shutter
Ch 3-5 RGB (left)
Ch 6-8 RGB (left mid)
Ch 9-11 RGB (Right mid)
Ch 12-14 RGB (Right)
it's better to add separate RGB Pars and just have Ch1/2 as a dummy dimmers during usage.