Page 1 of 1

Fixture orientation

PostPosted: 15 March 2020, 15:17
by thorehl
There is something up with this function.
- Add a mover (as its easiest to se problem)
- Rotate fixture on Y-axis = 90

Changes on Z-axis rotates the fixture on X-axis

Re: Fixture orientation

PostPosted: 16 March 2020, 08:56
by support
Yes, this is because the rotation is based on the 3 axis of the stage.

Re: Fixture orientation

PostPosted: 16 March 2020, 18:57
by thorehl
I get that, but rotation on Z and X-axis are the same. There's now way to tilt the fixture sideways (Z-axis).