ColorDash Par Quad 7 - dimmer not working [fixed]

graphic representation in 3 dimensions

ColorDash Par Quad 7 - dimmer not working [fixed]

Postby elysiumexp » 23 December 2016, 04:21

My company's primary LED static wash fixture is the ColorDash Par Quad 7. Using the supplied 10CH profile file, the dimmer doesn't work in 3D mode, but it works with the strobe feature acting as the main dimmer. How can this be corrected?

[image]
--
Nicholas Hardy | Executive Producer
the Elysium Experience | Event Design • Production • Talent
20504 Hall Road • Clinton Township, MI 48038
http://elysiumexp.com
elysiumexp
 
Posts: 4
Joined: 23 December 2016, 04:17
Location: Detroit Area, MI

Re: 3D View Dimmers & Strobing

Postby BartKrap » 23 December 2016, 13:25

You should put the "strobe_dimmer" as "shutter"

And remove the blackout from the dimmer channel (don't forget to change the starting value to 0).
Head of lighting, lighting designer and lighting operater at De Zoom and Pinky's in Renesse and Ron van der Veen Entertainment.
BartKrap
 
Posts: 215
Joined: 06 June 2016, 18:37
Location: Netherlands

Re: 3D View Dimmers & Strobing

Postby elysiumexp » 25 December 2016, 05:28

That worked. Thank you so much.
--
Nicholas Hardy | Executive Producer
the Elysium Experience | Event Design • Production • Talent
20504 Hall Road • Clinton Township, MI 48038
http://elysiumexp.com
elysiumexp
 
Posts: 4
Joined: 23 December 2016, 04:17
Location: Detroit Area, MI


Return to 3DView

Who is online

Users browsing this forum: No registered users and 4 guests