3D Generator Not Working - Please Help! [fixed]

graphic representation in 3 dimensions

3D Generator Not Working - Please Help! [fixed]

Postby monabaker » 14 April 2010, 15:05

I installed ShowXpress on my laptop without an issue EXCEPT the 3d generator doesn’t work. I have attached a screen shot. Any thoughts?

Image
monabaker
 
Posts: 14
Joined: 14 April 2010, 14:54

Re: 3D Generator Not Working - Please Help!

Postby support » 14 April 2010, 21:12

You can send us your lightshow.
We will check it.
The Lighting Controller
support
Administrateur
 
Posts: 10538
Joined: 07 December 2009, 16:32

Re: 3D Generator Not Working - Please Help!

Postby monabaker » 14 April 2010, 21:47

How do I do this?
monabaker
 
Posts: 14
Joined: 14 April 2010, 14:54

Re: 3D Generator Not Working - Please Help!

Postby Pink LD » 15 April 2010, 04:37

From the FAQ section of the Forum:
When and how to contact support

Postby support » 27 December 2009, 16:09
When necessary, we will ask you to send us some attachement by email.
Our email address is support"at"thelightingcontroller.com (replace "at" by @).
In order that everybody benefit of your message, first thing to do is to make a post in the forum.

We will answer exclusively to emails and private messages intended by us.


Send your files to the email address. I have done it myself before and they figured out my problem and fixed it. Good luck, I hope this helps!
Pink LD
 
Posts: 688
Joined: 04 January 2010, 19:03
Location: Green Bay WI

Re: 3D Generator Not Working - Please Help!

Postby monabaker » 15 April 2010, 12:47

What files do they want me to send to them? Just the screen shot I posted here? If so, I e-mailed that address last night and provided a link to this thread.
monabaker
 
Posts: 14
Joined: 14 April 2010, 14:54

Re: 3D Generator Not Working - Please Help!

Postby DoubleDee » 15 April 2010, 15:15

Email them your Lightshows file.

On my computer it's in the Harddrive/Documents and Settings/Administrator/TheLightingController.

I've sent them files as well. Most helpful.
DoubleDee
 
Posts: 21
Joined: 16 March 2010, 04:44

Re: 3D Generator Not Working - Please Help!

Postby monabaker » 15 April 2010, 23:16

E-mailed .ZIP file as instructed.
monabaker
 
Posts: 14
Joined: 14 April 2010, 14:54

Re: 3D Generator Not Working - Please Help!

Postby monabaker » 16 April 2010, 00:51

Okay, we're getting closer!

3D view is now working, and I can see the room, walls, ceiling, etc. I can move the room around just fine.

I cannot see any of my fixtures in it.

Suggestions?
monabaker
 
Posts: 14
Joined: 14 April 2010, 14:54

Re: 3D Generator Not Working - Please Help!

Postby monabaker » 16 April 2010, 11:24

PROBLEMS SOLVED!

No one from support got back to me (as of yet at least), but I was able to resolve the issue myself. It looked like 3D generator was trying to pull info from the previous version of ShowXpress. I uninstalled V5, and then reinstalled V6 which brought back the working generator, but then my fixtures didn't load. I went back into setup, went into the 1st fixture, changed a setting, changed it back, clicked save, and then all my stuff showed up!

At this point, I am good to go!
monabaker
 
Posts: 14
Joined: 14 April 2010, 14:54

Re: 3D Generator Not Working - Please Help!

Postby support » 16 April 2010, 11:59

We received your zip file last night at 01:15, and (normally) during night period we do not work a lot.
Anyway, we are also able to see the fixtures of your lightshow, in 3DView.
We do not understand how there could be any conflict between V5 and V6, but the most important is your problem is fixed.
The Lighting Controller
support
Administrateur
 
Posts: 10538
Joined: 07 December 2009, 16:32


Return to 3DView

Who is online

Users browsing this forum: No registered users and 9 guests