Windows Version 6.30. I have a editor scene with 15 steps. I added a fixture, a mayhem, starting address 62, with 7 channels, channles 62-68 . I want to set channels 65 and 66 to 70 for all steps in the scene.
1 - Open up scene in editor. Working in All Channels Editor View. Select step 1. Channels 1-61 are already programmed. Channels 62-68 (the new fixture), are null, have no value.
2 - Set channels 65 and 66 to the value of 70. Channels 62,63,64,67,68 are still null, have no value.
3- Select channels 65 and 66, they both show red check marks
4 - Right click and selet "Copy Selected Channels"
5- Right click again, (channels 65 and and 66 still selected), and select "Paste On All steps"
6- After paste channels 65 and 66 are no longer selected. In step 1, channels 65 and 66 still have a value of 70, but now channel 67 alos has a value of 70. Looking at the steps 2 -15, channels 65, 66, and 67 now have a value of 0.
No matter what I try I can't seem to get paste to all steps to work, even when just tyring to use "Copy Channel" and "Paste On All Steps".
Am I doing something wrong? Plesae Help. It would make programming scenes so much easier if I could get this to work. Thanks for your time.