Ayrton - Zonda 3 Wash

ask here the fixture profile you need for Editor
Post Reply
JBohacik
Posts: 4
Joined: 29 August 2025, 02:42

Ayrton - Zonda 3 Wash

Post by JBohacik »

Hello! Looking to get a fixture profile for the Zonda 3 Wash on ShowXpress in Standard mode, if possible. Thank you! :D

Link to manual: (https://www.ayrton.eu/wp-content/upload ... t_V130.pdf)
Top
Post Reply

Return to “Fixture profile requirement for Editor”