Last Saterday I ran a show with two universes (Box and SSA) and the SSA interface stopped working during the show. Not a drama, because only a few light were attached to that universe. To minimize the impact I wanted to upload some scens (steps and pixels) to the SSA interface. So in case it would stop responding again, I have at least a small subset of lighting effects left to use.
So today I wanted to upload the scenes via Sweetlight (using version 8.2.10), which seem to work fine. When testing the scenes from within sweetlight's standalone page, the light do exactly what I want (don't fully understand the 'timeline duration'option). WHen uplodaing, I can see nicely the progressbar and no errors are reported.
But when pushing one of the buttons, nothing happens (the led above the button goes on and on a second push it goes out again, but lights aren't responding at all).
I tried to disconnect the device from my laptop, disconnected it from power and reconnected it again, but did't get it to work.
Is this supposed to work like I describe here?
Is there anything I'm doing wrong?
Would be nice to get some feedback the coming days, because I would like to be on the safe side coming weekend
So thanks in advance for your help!
Regards,
Roger Niesten