Hello!
I have a DMX-AN2 wich I have connected with the LAN Cable to my MacBookAir M1. When I want to tick the box for Artnet in the Network settings. It is grayed out? What am I doing wrong?
If I connect it with other software I get connection an can control my moving heads.
Can’t activate ArtNet in Network Settings [fixed]
Re: Can’t activate ArtNet in Network Settings
This tutorial may help you: https://www.youtube.com/watch?v=JISeyVcqXvs
The Lighting Controller
Re: Can’t activate ArtNet in Network Settings
Hi,
I have the same issue, the YouTube link you share is with the older show express versions. the new version v.9 release in 2020 keep showing the Artnet box greyed out. There's nothing I can do that can activate. I am not sure if I am missing something here. contacted tech support but get no response....
I have the same issue, the YouTube link you share is with the older show express versions. the new version v.9 release in 2020 keep showing the Artnet box greyed out. There's nothing I can do that can activate. I am not sure if I am missing something here. contacted tech support but get no response....
Re: Can’t activate ArtNet in Network Settings
Could you please post a screenshot showing this problem ?
The Lighting Controller
Re: Can’t activate ArtNet in Network Settings
Hi
attached is the screenshot. the Artnet checkbox below the Virtual DJ is greyed out.
[image]
attached is the screenshot. the Artnet checkbox below the Virtual DJ is greyed out.
[image]
Re: Can’t activate ArtNet in Network Settings
Thank you for this screenshot.
Our software asks the operating system to open the port 6454 and the OS returns "this is not possible".
This is usually because the port is already in use by another application.
Our software asks the operating system to open the port 6454 and the OS returns "this is not possible".
This is usually because the port is already in use by another application.
The Lighting Controller
Re: Can’t activate ArtNet in Network Settings
Thank you. may I know how do I know if the port # is being used or is not opened? Because I tried on Mac OS and Window PC, both have the same outcome with Artnet greyed out.
-
- Posts: 364
- Joined: 03 April 2017, 02:28
Re: Can’t activate ArtNet in Network Settings
Do you have one of the USB to DMX interfaces connected? Artnet is not unlocked without one of these being plugged in
Re: Can’t activate ArtNet in Network Settings
I have the DMX-AN2 connected to computer via Ethernet cable while the DMX output is connected directly to the Lights
Re: Can’t activate ArtNet in Network Settings
You need one DMX interface to be connected to open Artnet (https://forum.thelightingcontroller.com ... =81&t=3741).
In the first screen when opening our software, you can read:
In the first screen when opening our software, you can read:
For instance with the interface "D512S", you will open 2 Artnet universes.0 Interface(s) found
0 Artnet interface(s) available
The Lighting Controller